Be careful not to overfill the cartridge. REFILL THE CARTRIDGE WHILE OUTSIDE OF THE PRINTER. Using the provided syringe top the cartridges. Poor results of an ink and film mismatch include slow drying, inconsistent results, a haze around the print that happens as water separates the emulsion from the carrier sheet.Īt the first sign of a light print check the cartridge to see if it needs additional dye added. Dye is recommended for printing films for screen exposure. This otherwise fine brand is NOT coated for best results with DYE like Dmax Ink™. Unapproved Film Brands: Ulano PIJF (Pigment Inkjet Film). Look for film that works with DYE ink when using the Dmax™ Dye in your Ink Master Kit. With a variety of film manufacturers with different manufacturing specifications some will work best, work better than others, or not work well at all.
If necessary run a cleaning routine.Ī clean Nozzle Pattern test print means you are ready to start printing films. Open the printer’s OEM driver and run a Nozzle Pattern test print to verify the printer is clean and BLACK ink is properly printing. Incorrect configuration will result in the use of colored ink and/or black pigment ink. Refer to your AccuRIP™ Emerald documentation. Make sure that the All Black Ink™ feature is ON and configured to the Photo Black Slot only. Install and setup AccuRIP™ Emerald Software by Freehand. Insert the cartridge in the photo black slot (using the same procedure used to insert an Epson cart) Note: If the cartridge reports a failure during normal use, removing the air hole plug and reinserting will often resolve the issue. (c) Add ink slow enough to avoid a spillover. (b) Wearing gloves and using the included funnel fill the cartridge with no more than 700mL of Dmax Black Dye Ink™. (a) Remove any air hole tab on the cartridge or open plug. Contact Epson directly if printer is not printing and/or producing a clean test print from the Epson Printer Driver. Setup your Epson printer using stock Epson inks.
0 kommentar(er)
